- 2024 YEARS
- 2023 YEARS
-
상지 복합 재활운동을 위한 상지 재활운동 장치 개발. 한국기계가공학회지, 한국기계가공학회, 2023-12
권 22 호 12 페이지 29 ~ 36
공동저자정보 -
항공기 엔진용 의 생산성 향상을 위한 Long Rod 전용 지그 개발. 한국기계가공학회지, 한국기계가공학회, 2023-09
권 22 호 9 페이지 73 ~ 79
공동저자정보 -
A Feasibility Study on the Use of Injection Molding Systems for Mass Production of 100W Class Wind Turbine Blades. PROCESSES, MDPI, 2023-06
권 11 호 6 페이지 1855 ~ 1855
공동저자정보
-
- 2022 YEARS
-
Numerical Modeling of an Impinging Jet Flow inside a Thermal Cut Kerf Using CFD and Schlieren Method. APPLIED SCIENCES-BASEL, MDPI AG, 2022-10
권 12 호 19
공동저자정보 -
Analysis of Gas Flow Dynamics in Thermal Cut Kerf Using a Numerical and Experimental Approach for Nozzle Selection. PROCESSES, MDPI, 2022-10
권 10 호 10
공동저자정보 -
External exposure specific analysis for radiation worker in reuse of containment building for Kori Unit 1. Nuclear Engineering and Technology, 한국원자력학회, 2022-05
권 54 호 5 페이지 1781 ~ 1788
공동저자정보
-
- 2021 YEARS
-
SNCM439재질의 전차용 엔진클러치 암플랜지 개발. 한국기계가공학회지, 한국기계가공학회, 2021-11
권 20 호 11 페이지 67 ~ 73
공동저자정보 -
Flexible and highly sensitive three-axis pressure sensors based on carbon nanotube/polydimethylsiloxane composite pyramid arrays. SENSORS AND ACTUATORS A-PHYSICAL, ELSEVIER SCIENCE SA, 2021-11
권 331 페이지 113034 ~ 113034
공동저자정보 -
플라즈마 아크 피어싱에서 더블 아크가 STS304 상단면에 미치는 특성 분석. 대한용접접합학회지 (대한용접접합학회지), 대한용접접합학회, 2021-08
권 39 호 4 페이지 427 ~ 434
공동저자정보 -
Experimental Study on Melt Decontamination of Stainless Steel and Carbon Steel Using Induction Melting. METALS, MDPI AG, 2021-08
권 11 호 8 페이지 1218 ~ 1218
공동저자정보 -
Numerically and Experimentally Verified Design of a Small Wind Turbine with Injection Molded Blade. PROCESSES, MDPI, 2021-05
권 9 호 5 페이지 776 ~ 776
공동저자정보 -
Derivation of preliminary DCGL for Kori Unit 1 using RESRAD-OFFSITE and comparison with RESRAD-ONSITE. ANNALS OF NUCLEAR ENERGY, PERGAMON-ELSEVIER SCIENCE LTD, 2021-02
권 151 페이지 107954 ~ 107954
공동저자정보
-
- 2020 YEARS
-
Radionuclide-Specific Exposure Pathway Analysis of Kori Unit 1 Containment Building Surface. 방사성폐기물학회지, 한국방사성폐기물학회, 2020-09
권 18 호 3 페이지 347 ~ 354
공동저자정보 -
Study on the soil evaluation methodology of on and offsite Kori Unit 1. ANNALS OF NUCLEAR ENERGY, PERGAMON-ELSEVIER SCIENCE LTD, 2020-09
권 144 페이지 0 ~ 0
공동저자정보 -
Derivation of preliminary derived concentration guideline level (DCGL) by reuse scenario for Kori Unit 1 using RESRAD-BUILD. Nuclear Engineering and Technology, 한국원자력학회, 2020-06
권 52 호 6 페이지 1231 ~ 1242
공동저자정보 -
Precise measurement of the surface shape of silicon wafer by using a new phase-Shifting algorithm and wavelength-tuning interferometer. APPLIED SCIENCES-BASEL, MDPI AG, 2020-05
권 10 호 9 페이지 3250 ~ 3250
공동저자정보 -
Comparative analysis of probabilistic analysis and deterministic analysis by RESRAD code. ENERGIES, MDPI AG, 2020-04
권 13 호 8 페이지 0 ~ 0
공동저자정보 -
Preliminary surface soil area factor for elevated residual radioactivity of Kori Unit 1 considering adjacent Unit 2. ANNALS OF NUCLEAR ENERGY, PERGAMON-ELSEVIER SCIENCE LTD, 2020-01
권 135 페이지 106958 ~ 106958
공동저자정보
-
- 2019 YEARS
-
Surface profilometry of silicon wafers using wavelength-tuned phase-shifting interferometry. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 대한기계학회, 2019-11
권 33 호 11 페이지 5327 ~ 5335
공동저자정보 -
Tumor localization using radio-frequency identification clip marker: experimental results of an ex vivo porcine model. SURGICAL ENDOSCOPY AND OTHER INTERVENTIONAL TECHNIQUES, SPRINGER-VERLAG, 2019-05
권 33 호 5 페이지 1441 ~ 1450
공동저자정보 -
Trajectory Tracking Control of a Hydraulic System Using TSMCSPO based on Sliding Perturbation Observer. APPLIED SCIENCES-BASEL, MDPI AG, 2019-04
권 9 호 7 페이지 1455 ~ 1455
공동저자정보
-
- 2018 YEARS
-
Derivation of preliminary derived concentration guideline levels for surface soil at Kori Unit 1 by RESRAD probabilistic analysis. Nuclear Engineering and Technology, 한국원자력학회, 2018-12
권 50 호 8 페이지 1289 ~ 1297
공동저자정보 -
고리1호기 증기발생기 제염해체 시 작업자 피폭선량 평가 및 저감화 방안. 방사성폐기물학회지, 한국방사성폐기물학회, 2018-09
권 16 호 3 페이지 377 ~ 387
공동저자정보 -
A novel coarse-to-fine registration approach for aligning partially overlapped 3D scanned data. INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, TAYLOR & FRANCIS LTD, 2018-08
권 31 호 8 페이지 718 ~ 726
공동저자정보 -
고리 1호기의 잔류방사능 유도농도(DCGL)를 적용한 회색영역 설정과 핵종농도평가. 한국방사선학회 논문지, 한국방사선학회, 2018-06
권 12 호 3 페이지 297 ~ 304
공동저자정보
-
- 2017 YEARS
- 2016 YEARS
-
가변곡률을 가진 나선형 블레이드 제작을 위한 원추형 롤 성형 공정설계. 한국정밀공학회지, 한국정밀공학회, 2016-11
권 33 호 11 페이지 911 ~ 918
공동저자정보 -
미국의 원전 해체관련 부지특성 및 최종상태 조사를 위한 방사성 오염 핵종결정 방법에 대한 분석. 방사성폐기물학회지, 한국방사성폐기물학회, 2016-09
권 14 호 3 페이지 267 ~ 277
공동저자정보 -
A method for fabricating a micro-structured surface of polyimide with open and closed pores. Journal of the Korean Physical Society, 한국물리학회, 2016-08
권 69 호 3 페이지 386 ~ 389
공동저자정보 -
Direct Copper Micro Patterning on the Surface of Thin Polymer by Photothermal Effect of UV Pulsed Laser Exposure. NANOSCIENCE AND NANOTECHNOLOGY LETTERS, AMER SCIENTIFIC PUBLISHERS, 2016-01
권 8 호 1 페이지 71 ~ 74
공동저자정보
-
- 2015 YEARS
-
A Study on Micro/Nano Pattern Replication Using a Hydroxyethyl Cellulose Polymer. Journal of the Korean Physical Society, 한국물리학회, 2015-12
권 67 호 12 페이지 1966 ~ 1969
공동저자정보 -
Swarm intelligence based on modified PSO algorithm for the optimization of axial-flow pump impeller. JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 대한기계학회, 2015-11
권 29 호 11 페이지 4867 ~ 4876
공동저자정보 -
국외 부지해제기준 분석을 통한 국내 원자력발전소 부지해제기준 도출에 관한 고찰. 한국방사선학회 논문지, 한국방사선학회, 2015-08
권 9 호 5 페이지 269 ~ 277
공동저자정보 -
금속사출성형을 이용한 STS 316L 밸브피팅 제작에 대한 연구. 소성가공, 한국소성가공학회, 2015-04
권 24 호 2 페이지 121 ~ 129
공동저자정보
-
- 2014 YEARS
-
Imbalance filling of multi-cavity tooling during powder injection molding. POWDER TECHNOLOGY, ELSEVIER SCIENCE SA, 2014-05
권 257 페이지 124 ~ 131
공동저자정보 -
Cooling channel design of hot stamping tools for uniform high-strength components in hot stamping process. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, SPRINGER-VERLAG LONDON LTD, 2014-02
권 70 페이지 1189 ~ 1203
공동저자정보
-
- 2013 YEARS
-
Gas-assisted powder injection molding: A study about residual wall thickness. POWDER TECHNOLOGY, ELSEVIER SCIENCE SA, 2013-05
권 239 페이지 389 ~ 402
공동저자정보
-
- 2012 YEARS
-
Removal of the Water Soluble Binder Components from Titanium and Titanium Alloy Powder Compacts Produced by MIM. KEY ENGINEERING MATERIALS, Trans Tech Publications LTD, 2012-08
권 520 페이지 181 ~ 186
공동저자정보 -
DEVELOPMENT OF ULTRASONIC DENTAL TIPS BY POWDER INJECTION MOLDING. INTERNATIONAL JOURNAL OF POWDER METALLURGY, AMER POWDER METALLURGY INST, 2012-03
권 48 호 2 페이지 11 ~ 20
공동저자정보
-
- 2011 YEARS
-
Effects of process parameters in plastic, metal, and ceramic injection molding processes. KOREA-AUSTRALIA RHEOLOGY JOURNAL, KOREAN SOC RHEOLOGY, 2011-09
권 23 호 3 페이지 127 ~ 138
공동저자정보 -
Mixing titanium MIM feedstock: Homogeneity, debinding and handling strength. Journal of Sensor Science and Technology, 한국센서학회, 2011-06
권 5 호 2 페이지 54 ~ 59
공동저자정보
-
- 2010 YEARS
-
Gas-assisted powder injection molding: A study on the effect of processing variables on gas penetration. POWDER TECHNOLOGY, ELSEVIER SCIENCE SA, 2010-06
권 200 호 3 페이지 128 ~ 135
공동저자정보 -
CHARACTERIZATION AND SIMULATION OF MACROSCALE MOLD-FILLING DEFECTS IN MICROMINIATURE POWDER INJECTION MOLDING. INTERNATIONAL JOURNAL OF POWDER METALLURGY, AMER POWDER METALLURGY INST, 2010-05
권 46 호 3 페이지 49 ~ 58
공동저자정보 -
A REVIEW OF COMPUTER SIMULATIONS IN POWDER INJECTION MOLDING. INTERNATIONAL JOURNAL OF POWDER METALLURGY, AMER POWDER METALLURGY INST, 2010-05
권 46 호 3 페이지 37 ~ 46
공동저자정보 -
Model-Based Control of Electroslag Remelting Process Using Unscented Kalman Filter. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, ASME-AMER SOC MECHANICAL ENG, 2010-01
권 132 호 1 페이지 011 ~ 011
공동저자정보
-
- 2009 YEARS
-
Effect of powders and binders on material properties and molding parameters in iron and stainless steel powder injection molding process. POWDER TECHNOLOGY, ELSEVIER SCIENCE SA, 2009-07
권 193 호 2 페이지 162 ~ 169
공동저자정보
-
- 2008 YEARS
-
Integrated filling, packing and cooling CAE analysis of powder injection moulding parts. POWDER METALLURGY, MANEY PUBLISHING, 2008-12
권 51 페이지 318 ~ 326
공동저자정보
-
- 1995 YEARS
-
SLIP CHARACTERIZATION OF POWDER/BINDER MIXTURES AND ITS SIGNIFICANCE IN THE FILLING PROCESS ANALYSIS OF POWDER INJECTION-MOLDING. Powder Technology, Elsevier, 1995-03
권 85 페이지 45 ~ 55
공동저자정보
-